Langfang Dehou Wood Industry Co., Ltd.
Product lines · Wen'an, Hebei

Seven lines.
One mill.

Every line below is pressed at the YUFU factory and shipped with the same inspection. Tell us the application and the cycle count — we will match the panel.

3 × 6 ft · 915 × 1830 mm 4 × 8 ft · 1220 × 2440 mm 12 / 14 / 15 / 17 / 18 mm WBP and phenolic glue Custom sizes on request
13 Boiling Water Resistant Plywood
Yufu BWR plywood cures phenolic resin through every glue line and boil-checks each production run. Built for steam rooms, hot washdown and cold-hot shock in kitchens and laundries.
14 Plywood Sheathing for Roof
Yufu plywood sheathing for roof decks: phenolic exterior glue, sealed edges, T&G joints and printed nail lines. Built for rain delays, snow loads and crew traffic, in 12, 15 and 18 mm.
15 Floor Plywood
Floor plywood is a subfloor panel for vinyl, carpet and wood flooring: it spreads loads across the framing and keeps joints level, so the finished floor stays flat and quiet.
16 Light Plywood
Light plywood: a low-density hardwood core in a controlled density band, with thin even faces. Predictable weight and stiffness, steady CNC cuts and a pale tone that takes dye and spray evenly.
17 Good Plywood for Cabinets
For cabinet work, good plywood means stable panels, reliable hardware fixing and shelves that hold their line. Yufu plywood is a multi-layer veneer panel for carcasses, partitions and shelves in kitchens, wardrobes and built-ins, with thickness chosen per component.
18 1/2 Inch Plywood 4x8 Sheet
Yufu 1/2 inch plywood 4x8 sheets are sanded to a controlled gauge around 12 mm, cross-laminated from seven veneers and trimmed square at 1220 x 2440 mm. They sit flush against adjoining materials and span framing without a spongy feel.
19 3/4 Plywood 4x8 Sheets
3/4 plywood 4x8 sheets give 32 sq ft of continuous panel per sheet, for subfloors, load-bearing platforms and structural components. Cross-laminated veneers spread load across the frame, and the 18 mm nominal gauge keeps spans stiff.
20 Smooth Plywood
Smooth plywood is a bare, evenly sanded substrate for furniture and interior panels. Consistent sanding means paint soaks in evenly and thin veneers sit flat, while cut edges are ready for sealing or banding, so finish stays consistent across a batch.
21 Smooth Face Shuttering Plywood for Concrete
Smooth face shuttering plywood gives wet concrete a flat, even contact surface, so walls, columns and slabs come out with fewer marks and less patching. Panels cut and drill on site, take standard release agents and stay serviceable across pours.
22 Exposed Concrete Forming Plywood
Exposed concrete forming plywood is cut to your panel layout, so joint lines and tie-hole spacing land as drawn on visible concrete. Even contact faces and consistent sheet dimensions keep those lines running true across a wall.
23 Plywood for Decorative Exposed Architectural Concrete
Decorative concrete plywood carries the surface texture you choose into the finished concrete, so facades and feature walls read as designed. Contact faces are confirmed on a mock-up cast before the main pour, and panel condition stays consistent between casting areas.
24 Smooth Finish Plywood for Concrete Shuttering
Smooth finish plywood is a shuttering panel for concrete seen from below or left on show: soffits, cast counters, landscape details. The contact face inspects clean before each pour, and sheets cut down for small moulds without losing the face.

Every line can be quoted with film colour, logo printing and edge treatment. Send the panel, size, thickness, quantity and destination port.

Sizes and specification

Standard panel build.

Sheet sizes 1220 × 2440 mm · 1830 × 915 mm
Thickness 12 / 14 / 15 / 17 / 18 mm
Plies 7–10 (4 × 8 ft) · 7–11 (3 × 6 ft)
Length, width, diagonal ± 3 mm
Thickness tolerance ± 0.3 mm at 12 mm · ± 0.5 mm at 15 and 18 mm
Warpage ≤ 1 %
Moisture after pressing 6 – 10 %
Measured, not promised

Performance on the label.

Control minimums versus a measured 18 mm phenolic film-faced panel. Batch certificates are available on request.

1.72 MPa
Glue shear strength
min 0.70 · +146 %
36 MPa
Static bending strength
min 24 · +50 %
5 017
Elastic modulus, MPa
min 5 000 · at minimum
9 %
Moisture content
band 6–14 · mid-band
0.04
Surface wear, g/100r
limit 0.08 · 2× under
Selection guide

Which panel fits your pour?

Send the application, cycle count and destination port. We reply with the recommended thickness, a price and a lead time.

Concrete

High-rise and residential

Slab and wall formwork for towers and housing. We typically recommend 15–18 mm phenolic film-faced panels with WBP glue for a high reuse count.

Civil works

Bridges and heavy structures

Higher loads and more casting cycles. Step up the thickness, seal the edges, and let us match the panel to your cycle count.

Interiors

Furniture and fit-out

Commercial plywood, blockboard and melamine eco board for joinery, wardrobes and OEM furniture production.

Start a conversation

Get a quotation with price, lead time and recommended thickness.

Mill-direct · English reply · Quotation in one email