Langfang Dehou Wood Industry Co., Ltd.
Product lines · Wen'an, Hebei

Seven lines.
One mill.

Every line below is pressed at the YUFU factory and shipped with the same inspection. Tell us the application and the cycle count — we will match the panel.

3 × 6 ft · 915 × 1830 mm 4 × 8 ft · 1220 × 2440 mm 12 / 14 / 15 / 17 / 18 mm WBP and phenolic glue Custom sizes on request
25 Black Film Faced Plywood
Black film faced plywood is a shuttering panel with black phenolic film bonded to a multi-ply core. The film resists abrasion, concrete residue and moisture, while sealed edges keep water out of the core. Film adhesion is what decides cycles per sheet.
26 Mirror Finish Film Faced Plywood
Mirror finish film faced plywood presses high-gloss phenolic film against polished steel plates over a patch-free face veneer, so cast concrete comes out glass-smooth. A peel-off protective layer guards the gloss through handling, cutting and framing until pour.
27 Premium Construction Timber
Construction timber is graded for its structural role rather than its looks: straight, dimensionally accurate sections that cut and fasten cleanly for wall framing, roof structures and floor systems. Grade, section size and moisture protection follow your drawings.
28 Pallet Lumber
Pallet lumber covers deck boards, stringers and blocks in consistent thickness and width, with moisture controlled so components stay flat in storage. Sound, straight stock cuts and nails without splitting, so assembly runs at rate. Species and dimensions follow your spec.
29 Melamine Faced Blockboard
Melamine faced blockboard pairs a strip-wood core with a factory-finished melamine face, so cabinet, wardrobe and shelving panels come off the line without painting or laminating. The block core stays flat and holds screws near edges. Thickness and decor are selectable.
30 Melamine Faced Plywood
Melamine faced plywood bonds melamine paper to both faces of a void-controlled poplar or eucalyptus core, so panels stay flat and hold screws at the edges. Available in 9–18 mm, matt, gloss and woodgrain, ready to cut, edge-band and assemble.

Every line can be quoted with film colour, logo printing and edge treatment. Send the panel, size, thickness, quantity and destination port.

Sizes and specification

Standard panel build.

Sheet sizes 1220 × 2440 mm · 1830 × 915 mm
Thickness 12 / 14 / 15 / 17 / 18 mm
Plies 7–10 (4 × 8 ft) · 7–11 (3 × 6 ft)
Length, width, diagonal ± 3 mm
Thickness tolerance ± 0.3 mm at 12 mm · ± 0.5 mm at 15 and 18 mm
Warpage ≤ 1 %
Moisture after pressing 6 – 10 %
Measured, not promised

Performance on the label.

Control minimums versus a measured 18 mm phenolic film-faced panel. Batch certificates are available on request.

1.72 MPa
Glue shear strength
min 0.70 · +146 %
36 MPa
Static bending strength
min 24 · +50 %
5 017
Elastic modulus, MPa
min 5 000 · at minimum
9 %
Moisture content
band 6–14 · mid-band
0.04
Surface wear, g/100r
limit 0.08 · 2× under
Selection guide

Which panel fits your pour?

Send the application, cycle count and destination port. We reply with the recommended thickness, a price and a lead time.

Concrete

High-rise and residential

Slab and wall formwork for towers and housing. We typically recommend 15–18 mm phenolic film-faced panels with WBP glue for a high reuse count.

Civil works

Bridges and heavy structures

Higher loads and more casting cycles. Step up the thickness, seal the edges, and let us match the panel to your cycle count.

Interiors

Furniture and fit-out

Commercial plywood, blockboard and melamine eco board for joinery, wardrobes and OEM furniture production.

Start a conversation

Get a quotation with price, lead time and recommended thickness.

Mill-direct · English reply · Quotation in one email