Boiling Water Resistant Plywood
BWR grade made for heat and moisture together: steam, hot-water rinsing and repeated hot-cool swings. Glue lines stay intact where ordinary cabinet boards stop at damp air. Thickness, face veneer and edge preparation can be adjusted.
Request a Quote →| Hot-Press Cure | Extended, temperature-controlled |
| Veneer Moisture Before Glue-Up | ≤ 8% |
| Thickness Range | 9 / 12 / 15 / 18 / 21 mm |
| Thickness Tolerance | ±0.5 mm |
| Surface | Sanded both sides |
| Options | Core, face, thickness and edge treatment adjustable |
What Sets It Apart
Fully Cured Phenolic Glue Lines
Phenolic resin cured through every veneer interface; under-cured lines are the main failure cause.
Boil-Checked Sampling
Samples from each press run are boiled as a routine factory check.
Veneers Dried Before Glue-Up
Low moisture avoids steam blisters and soft patches in the hot press.
Stable Through Cold-Hot Shock
Cross-laminated plies and cured resin handle steam-to-cool swings.
Where Heat and Moisture Meet the Panel
Choosing the Right Grade
Tell Yufu
- Heat source
- How often hot water or steam reaches the panel
- Planned finish
We suggest
- Thickness
- Face veneer
- Edge preparation
Why Choose Yufu?
Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.
- Experience: Years of plywood production.
- Capacity: About 50,000 m³ per year.
- Equipment: Veneer processing, pressing, cutting, surface treatment.
- Technology: Multiple utility model patents.
- Bulk Supply: Ready for wholesale and project orders.
Frequently Asked Questions
Can the panel stay in water permanently?
No. Glue lines survive repeated hot wetting, but timber swells if soaked. Seal edges and avoid immersion.
Can it be a worktop base by the sink or kettle?
Yes, under laminate, solid surface or stone. Seal sink and hob cut-outs.
Why PUR over EVA edge banding?
PUR is stronger and more heat- and moisture-resistant; EVA can soften and let steam in.
How can I tell if my plywood is boil-resistant?
Phenolic glue lines are dark reddish-brown, urea pale yellow. Only a hint; check the supplier specification.
What finish protects a visible face?
Coat both faces and all edges with the same system, such as two-pack polyurethane or laminate.