Product category
commercial plywood
3 × 6 ft · 915 × 1830 mm4 × 8 ft · 1220 × 2440 mm
12 / 14 / 15 / 17 / 18 mmWBP and phenolic glueCustom sizes on request
01
Light plywood: a low-density hardwood core in a controlled density band, with thin even faces. Predictable weight and stiffness, steady CNC cuts and a pale tone that takes dye and spray evenly.
02
For cabinet work, good plywood means stable panels, reliable hardware fixing and shelves that hold their line. Yufu plywood is a multi-layer veneer panel for carcasses, partitions and shelves in kitchens, wardrobes and built-ins, with thickness chosen per component.
03
Yufu 1/2 inch plywood 4x8 sheets are sanded to a controlled gauge around 12 mm, cross-laminated from seven veneers and trimmed square at 1220 x 2440 mm. They sit flush against adjoining materials and span framing without a spongy feel.
04
3/4 plywood 4x8 sheets give 32 sq ft of continuous panel per sheet, for subfloors, load-bearing platforms and structural components. Cross-laminated veneers spread load across the frame, and the 18 mm nominal gauge keeps spans stiff.
Sizes and specification
Standard panel build.
| Sheet sizes | 1220 × 2440 mm · 1830 × 915 mm |
| Thickness | 12 / 14 / 15 / 17 / 18 mm |
| Plies | 7–10 (4 × 8 ft) · 7–11 (3 × 6 ft) |
| Length, width, diagonal | ± 3 mm |
| Thickness tolerance | ± 0.3 mm at 12 mm · ± 0.5 mm at 15 and 18 mm |
| Warpage | ≤ 1 % |
| Moisture after pressing | 6 – 10 % |
Measured, not promised
Performance on the label.
Control minimums versus a measured 18 mm phenolic film-faced panel. Batch certificates are available on request.
1.72 MPa
Glue shear strength
min 0.70 · +146 %
36 MPa
Static bending strength
min 24 · +50 %
5 017
Elastic modulus, MPa
min 5 000 · at minimum
9 %
Moisture content
band 6–14 · mid-band
0.04
Surface wear, g/100r
limit 0.08 · 2× under
Selection guide
Which panel fits your pour?
Send the application, cycle count and destination port. We reply with the recommended thickness, a price and a lead time.
Concrete
High-rise and residential
Slab and wall formwork for towers and housing. We typically recommend 15–18 mm phenolic film-faced panels with WBP glue for a high reuse count.
Civil works
Bridges and heavy structures
Higher loads and more casting cycles. Step up the thickness, seal the edges, and let us match the panel to your cycle count.
Interiors
Furniture and fit-out
Commercial plywood, blockboard and melamine eco board for joinery, wardrobes and OEM furniture production.
Start a conversation
Get a quotation with price, lead time and recommended thickness.
Mill-direct · English reply · Quotation in one email