Langfang Dehou Wood Industry Co., Ltd.
Product category

film faced plywood

3 × 6 ft · 915 × 1830 mm4 × 8 ft · 1220 × 2440 mm 12 / 14 / 15 / 17 / 18 mmWBP and phenolic glueCustom sizes on request
01 Brown Film Faced Plywood for Construction
Yufu Black Film Faced Plywood is designed for concrete formwork in residential, commercial, and industrial construction projects. Its black protective film helps resist abrasion and concrete residue, while the multi-layer plywood core provides panel support. Stable film adhesion and internal bonding help reduce peeling and delamination. Suitable for wall, column, beam, and slab formwork, it supports repeated use when properly handled, cleaned, and maintained.
02 Phenolic Film Faced Plywood
Yufu Phenolic Film Faced Plywood is designed for concrete formwork in residential, commercial and infrastructure projects. Featuring a smooth phenolic resin film surface, it helps resist moisture and reduce direct contact between wet concrete and the plywood core. Its multi-layer wood veneer construction provides structural support and reliable bonding. Available in customized sizes and thicknesses, it is suitable for concrete wall, floor and slab formwork applications.
03 Laminated Plywood Sheets
Yufu Laminated Plywood Sheets feature a multi-layer plywood core with a decorative laminate surface, providing a uniform finish and reducing additional surface-finishing work. They are suitable for furniture components, elevator interiors, RV interiors, equipment cases, and laboratory furniture.
04 Waterproofing Plywood
Yufu Waterproofing Plywood features moisture-resistant bonding and a multi-layer veneer structure, helping reduce layer separation under suitable moisture conditions. It can be used as a substrate beneath waterproofing membranes or coatings in roofing, bathrooms, balconies, and utility areas.
05 Formwork Plywood
Yufu film-faced formwork plywood pairs hot-pressed phenolic film with a hardwood core for clean stripping and a uniform concrete surface. Sanded to a consistent gauge, with dense edge plies for repeated nailing. Film weight, thickness and edge treatment are tailored to your pours.
06 Concrete Form Panel
Concrete Form Panel is plain, uncoated plywood for formwork manufacturers. Multi-layer bonded veneers come with selectable core species and face veneer grades, so you apply your own film or surface finish and control the final specification.
07 Plywood Wall Boards
Factory-veneered plywood wall boards from Yufu: same-flitch grain, numbered in sequence, sealed backs and rebated or V-groove edges. Install-ready panels for continuous feature walls.
08 Plywood Cement Forms
Cross-laminated veneer panels from Yufu for ordinary concrete casting: foundations, beams, columns and walls. Easy to cut, align and brace, with surface treatment matched to your project.
09 5/8 Overlaid Plywood
Yufu 5/8 overlaid plywood is a hardwood-core panel faced with resin-impregnated fibre. The smooth, grain-free face takes paint evenly and keeps veneer cracks from printing through, so signs, trim and shutters hold a clean outdoor finish. Overlay weight and coverage are adjustable.
Sizes and specification

Standard panel build.

Sheet sizes 1220 × 2440 mm · 1830 × 915 mm
Thickness 12 / 14 / 15 / 17 / 18 mm
Plies 7–10 (4 × 8 ft) · 7–11 (3 × 6 ft)
Length, width, diagonal ± 3 mm
Thickness tolerance ± 0.3 mm at 12 mm · ± 0.5 mm at 15 and 18 mm
Warpage ≤ 1 %
Moisture after pressing 6 – 10 %
Measured, not promised

Performance on the label.

Control minimums versus a measured 18 mm phenolic film-faced panel. Batch certificates are available on request.

1.72 MPa
Glue shear strength
min 0.70 · +146 %
36 MPa
Static bending strength
min 24 · +50 %
5 017
Elastic modulus, MPa
min 5 000 · at minimum
9 %
Moisture content
band 6–14 · mid-band
0.04
Surface wear, g/100r
limit 0.08 · 2× under
Selection guide

Which panel fits your pour?

Send the application, cycle count and destination port. We reply with the recommended thickness, a price and a lead time.

Concrete

High-rise and residential

Slab and wall formwork for towers and housing. We typically recommend 15–18 mm phenolic film-faced panels with WBP glue for a high reuse count.

Civil works

Bridges and heavy structures

Higher loads and more casting cycles. Step up the thickness, seal the edges, and let us match the panel to your cycle count.

Interiors

Furniture and fit-out

Commercial plywood, blockboard and melamine eco board for joinery, wardrobes and OEM furniture production.

Start a conversation

Get a quotation with price, lead time and recommended thickness.

Mill-direct · English reply · Quotation in one email