Light Plywood
Low-density hardwood core with thin, even face veneers. Easy to handle, with core density held in a set band so weight, stiffness and machining behaviour stay predictable from sheet to sheet.
Request a Quote →| Sheet Size | 2440 × 1220 mm / 1830 × 915 mm |
| Thickness Range | 12 / 14 / 15 / 17 / 18 mm |
| Thickness Tolerance | 12 mm ±0.3 mm; 15–18 mm ±0.5 mm |
| Length and Width Tolerance | ±3 mm |
| Warp | ≤ 1% |
| Moisture Content | 6–10% |
| Bond Strength | ≥ 0.8 MPa |
| Options | Core, face, thickness and density band adjustable |
What Makes It Different
Defined Density Band
Core sorted in a narrow range, so you know roughly what a sheet weighs and how it cuts.
Stiffness per Kilogram
Thin, uniform veneers and glue lines keep bending strength up while the core stays light.
Repeatable on Router and CNC
Even density keeps settings stable, with fewer burn marks and less tear-out variation.
Pale, Even Tone
Neutral veneer suits clear finish, spray and dye; color matched within each lot.
Where Light Plywood Earns Its Keep
Light Plywood vs Sanded Cabinet Plywood
Both are sanded boards for furniture, spraying and edge-sealed assemblies, but they behave differently.
- Sanding: Softer, lighter face sands faster; use a lighter touch
- Spray and Dye: Pale veneer gives cleaner color; open grain benefits from a sealer coat
- Deflection: Denser cabinet core resists sag better; use 15–18 mm or shorter spans
- Edge Sealing: Lighter core absorbs more at the edge; seal or band before spraying
- Handling: A full sheet is noticeably lighter for high-volume or overhead work
Why Choose Yufu?
Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.
- Experience: Years of plywood production.
- Capacity: About 50,000 m³ per year.
- Equipment: Veneer processing, pressing, cutting, surface treatment.
- Technology: Multiple utility model patents.
- Bulk Supply: Ready for wholesale and project orders.
Frequently Asked Questions
Does a lighter core reduce stiffness on long shelves?
Slightly. Use 15 or 18 mm for spans over about 600 mm, add a front rail or edge band, or shorten the span.
How does it cut on CNC versus birch plywood?
Steady feed with little burn or tear-out variation. Run a test cut and adjust speed and bit sharpness before a full nest.
Can it hold books on a wall shelf?
Yes for normal loads: 18 mm shelf, solid brackets every 500–600 mm, fixed into studs or proper anchors.
How do I stop softer edges denting or fraying?
Pre-drill near the edge, avoid over-tightening fasteners and keep tools sharp.