Langfang Dehou Wood Industry Co., Ltd.
Product category

un film faced wbp plywood

3 × 6 ft · 915 × 1830 mm4 × 8 ft · 1220 × 2440 mm 12 / 14 / 15 / 17 / 18 mmWBP and phenolic glueCustom sizes on request
01 WBP Plywood
Yufu WBP plywood: weather-resistant phenolic bonding across cross-laminated veneers, for outdoor and intermittently wet panels. Seal cut edges and faces, since the bond resists moisture but the wood still needs protection.
02 Eucalyptus Plywood
Yufu eucalyptus plywood: full hardwood through the thickness, steam-conditioned against warp and tone-sorted on the face. Dense and dent-resistant, with crisp cut edges for exposed-edge work.
03 Poplar Core Plywood
Yufu poplar core plywood pairs a poplar veneer core with selected face grades: an economical, flat substrate for natural veneer or laminate. Light and easy to machine, it suits door components, drawer backs and partitions where the panel is not load-critical.
04 Boiling Water Resistant Plywood
Yufu BWR plywood cures phenolic resin through every glue line and boil-checks each production run. Built for steam rooms, hot washdown and cold-hot shock in kitchens and laundries.
Sizes and specification

Standard panel build.

Sheet sizes 1220 × 2440 mm · 1830 × 915 mm
Thickness 12 / 14 / 15 / 17 / 18 mm
Plies 7–10 (4 × 8 ft) · 7–11 (3 × 6 ft)
Length, width, diagonal ± 3 mm
Thickness tolerance ± 0.3 mm at 12 mm · ± 0.5 mm at 15 and 18 mm
Warpage ≤ 1 %
Moisture after pressing 6 – 10 %
Measured, not promised

Performance on the label.

Control minimums versus a measured 18 mm phenolic film-faced panel. Batch certificates are available on request.

1.72 MPa
Glue shear strength
min 0.70 · +146 %
36 MPa
Static bending strength
min 24 · +50 %
5 017
Elastic modulus, MPa
min 5 000 · at minimum
9 %
Moisture content
band 6–14 · mid-band
0.04
Surface wear, g/100r
limit 0.08 · 2× under
Selection guide

Which panel fits your pour?

Send the application, cycle count and destination port. We reply with the recommended thickness, a price and a lead time.

Concrete

High-rise and residential

Slab and wall formwork for towers and housing. We typically recommend 15–18 mm phenolic film-faced panels with WBP glue for a high reuse count.

Civil works

Bridges and heavy structures

Higher loads and more casting cycles. Step up the thickness, seal the edges, and let us match the panel to your cycle count.

Interiors

Furniture and fit-out

Commercial plywood, blockboard and melamine eco board for joinery, wardrobes and OEM furniture production.

Start a conversation

Get a quotation with price, lead time and recommended thickness.

Mill-direct · English reply · Quotation in one email