Product category
high gloss and mirror film faced plywood
3 × 6 ft · 915 × 1830 mm4 × 8 ft · 1220 × 2440 mm
12 / 14 / 15 / 17 / 18 mmWBP and phenolic glueCustom sizes on request
01
Black film faced plywood is a shuttering panel with black phenolic film bonded to a multi-ply core. The film resists abrasion, concrete residue and moisture, while sealed edges keep water out of the core. Film adhesion is what decides cycles per sheet.
Sizes and specification
Standard panel build.
| Sheet sizes | 1220 × 2440 mm · 1830 × 915 mm |
| Thickness | 12 / 14 / 15 / 17 / 18 mm |
| Plies | 7–10 (4 × 8 ft) · 7–11 (3 × 6 ft) |
| Length, width, diagonal | ± 3 mm |
| Thickness tolerance | ± 0.3 mm at 12 mm · ± 0.5 mm at 15 and 18 mm |
| Warpage | ≤ 1 % |
| Moisture after pressing | 6 – 10 % |
Measured, not promised
Performance on the label.
Control minimums versus a measured 18 mm phenolic film-faced panel. Batch certificates are available on request.
1.72 MPa
Glue shear strength
min 0.70 · +146 %
36 MPa
Static bending strength
min 24 · +50 %
5 017
Elastic modulus, MPa
min 5 000 · at minimum
9 %
Moisture content
band 6–14 · mid-band
0.04
Surface wear, g/100r
limit 0.08 · 2× under
Selection guide
Which panel fits your pour?
Send the application, cycle count and destination port. We reply with the recommended thickness, a price and a lead time.
Concrete
High-rise and residential
Slab and wall formwork for towers and housing. We typically recommend 15–18 mm phenolic film-faced panels with WBP glue for a high reuse count.
Civil works
Bridges and heavy structures
Higher loads and more casting cycles. Step up the thickness, seal the edges, and let us match the panel to your cycle count.
Interiors
Furniture and fit-out
Commercial plywood, blockboard and melamine eco board for joinery, wardrobes and OEM furniture production.
Start a conversation
Get a quotation with price, lead time and recommended thickness.
Mill-direct · English reply · Quotation in one email