1/2 Inch Plywood 4x8 Sheet
For buyers who find "half inch" varies between suppliers. Sanded to a controlled thickness, cross-laminated from seven thin veneers and trimmed square at 1220 × 2440 mm. Face grade, core species and thickness can be adjusted.
Request a Quote →| Nominal Thickness | 1/2 inch (12 mm) |
| Thickness Tolerance | ±0.3 mm |
| Sheet Size | 1220 × 2440 mm (4 × 8 ft) |
| Surface | Sanded both sides |
| Adhesive | Moisture-resistant urea-melamine or phenolic |
| Diagonal Difference | ≤ 3 mm |
| Moisture Content | 6–14% |
| Options | Thickness, size, face species and grade adjustable |
What Sets It Apart
Measured Thickness
Sanded to a tight window around 12 mm so joints and mixed materials line up without shimming.
More Cross-Grain Layers
Thinner veneers add glue lines and rigidity: stiffer between joists, less sag.
Square, Flat, Predictable
Controlled diagonals mean clean butting, less trimming and even feeding on vacuum tables.
Moisture Set for Destination
Dried to suit the installation climate, limiting seasonal movement.
Where a Half-Inch Sheet Does the Work
Request Your 1/2 Inch Specification
Send Yufu
- Drawings
- Framing spacing
- Finish requirements
We recommend
- Thickness window
- Face grade
- Core
Why Choose Yufu?
Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.
- Experience: Years of plywood production.
- Capacity: About 50,000 m³ per year.
- Equipment: Veneer processing, pressing, cutting, surface treatment.
- Technology: Multiple utility model patents.
- Bulk Supply: Ready for wholesale and project orders.
Frequently Asked Questions
How do I choose a face grade if one side stays hidden?
Pair a clean BB or CP face with a C back; structural plies stay the same on both sides.
How much does a sheet weigh?
Roughly 35–50 lb (16–23 kg) by species. Use two people for overhead lifting or stairs.
Is 1/2 plywood suitable for roof sheathing at wider spacing?
Depends on span rating and code. It suits 16-inch framing; for wider spacing, confirm rating or add edge clips and blocking.
What screws and spacing work best?
About 1-5/8 inch screws, roughly 6 inches apart on edges and 12 inches in the field, 3/8 inch from edges.
How should sheets be stored?
Flat on level bearers, off the ground and covered, with small battens between layers.