5/8 Overlaid Plywood
Hardwood-core panel faced with a smooth resin-impregnated fibre overlay. Flat, grain-free and paint-ready, it keeps veneer cracks from showing through the paint. Overlay weight, core and face coverage can be adjusted.
Request a Quote →| Nominal Thickness | 5/8 in. (15 mm overall) |
| Thickness Tolerance | ±0.5 mm |
| Overlay | Resin-impregnated fibre, both faces or one face |
| Overlay Weight | Standard or heavy-duty |
| Surface | Smooth, paint-ready |
| Adhesive | Phenolic |
| Edges | Square-cut |
| Options | Core, overlay weight and face coverage adjustable |
What Sets It Apart
Hides the Grain
Uniform face; one primer coat and a topcoat give an even finish.
Paint-Crack Protection
Overlay bridges the veneer so the paint film stays intact longer.
Overlay Matched to the Job
Standard for signs and trim; heavy-duty for daily handling.
Overlay Counted in the Gauge
Measured overall thickness keeps joints and hardware true.
Projects That Suit It
Specifying Your Overlay Panel
Tell Yufu
- What it will be painted with
- Where it will sit
- How hard it will be handled
We recommend
- Overlay weight
- Face coverage
Why Choose Yufu?
Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.
- Experience: Years of plywood production.
- Capacity: About 50,000 m³ per year.
- Equipment: Veneer processing, pressing, cutting, surface treatment.
- Technology: Multiple utility model patents.
- Bulk Supply: Ready for wholesale and project orders.
Frequently Asked Questions
Which paint system lasts longest outdoors?
Bonding primer plus two coats of 100% acrylic exterior paint, or two-pack polyurethane for harsher exposure.
Can I paint it without sanding?
Mostly. Wipe clean, scuff with 220-grit paper, then prime and paint.
How should joints and screw heads be treated?
Countersink and fill with exterior filler; fill 2–3 mm joint gaps with flexible sealant; spot-prime, sand, then topcoat.
Will it scratch or dent in daily use?
It resists light scuffs. Choose the heavy-duty overlay for rough use and avoid dragging sharp metal.
When can vinyl graphics go on?
After the paint has fully cured, usually 1–2 weeks. Use cast vinyl on a gloss or satin finish.