Plywood Wall Boards
Finished decorative panels, not raw base boards: selected veneer on the face, matched from one flitch and numbered in order, with wall-specific edges and a sealed back. Veneer, thickness, grooves and length can be tailored.
Request a Quote →| Core | Hardwood core selected to suit the face |
| Thickness Tolerance | ±0.3 mm |
| Grain Matching | Same-flitch, sequenced and numbered |
| Edge Profile | Square, rebated or V-groove |
| Groove Spacing | Optional |
| Back Face | Sealed against moisture |
| Adhesive | Moisture-resistant urea-melamine |
| Options | Veneer, thickness, grooves and length adjustable |
What Sets Them Apart
Factory-Veneered Faces
Veneer chosen and pressed at the factory; no veneering or sanding left on site.
Same-Flitch Sequencing
Consecutive numbered panels keep grain and tone flowing across the wall.
Edges Designed for Walls
Rebated, V-groove or shadow-gap edges make each joint a deliberate line.
Sealed Back
Blocks damp from masonry and cold walls, a common cause of cupping.
Walls That Suit Them
Planning Your Wall
Tell Yufu
- Room height
- Wall layout
- Preferred finish
We suggest
- Sheet length
- Veneer
- Joint style
Why Choose Yufu?
Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.
- Experience: Years of plywood production.
- Capacity: About 50,000 m³ per year.
- Equipment: Veneer processing, pressing, cutting, surface treatment.
- Technology: Multiple utility model patents.
- Bulk Supply: Ready for wholesale and project orders.
Frequently Asked Questions
How should panels be fixed over uneven walls?
Shim vertical battens flat at 400–600 mm centres, add a moisture barrier on damp walls, then fix with screws or pins and adhesive.
Can I mount a TV or shelves?
Yes, fixed through the panel into battens or framing. Add blocking behind for heavy brackets.
How do I lay out numbered panels?
Start from the lowest number and work along the wall. Leave 2–3 mm gaps and let panels acclimatise for 48–72 hours.
Do the boards need a finish?
Water-based clear lacquer or hardwax oil. Test on an offcut and coat the edges too.
How do I plan socket cut-outs?
Cut with a hole saw or router before fixing, with 2 mm clearance, and use box extenders.