Langfang Dehou Wood Industry Co., Ltd.
Products  /  Formwork Plywood
Yufu

Formwork Plywood

Yufu film-faced formwork plywood pairs hot-pressed phenolic film with a hardwood core for clean stripping and a uniform concrete surface. Sanded to a consistent gauge, with dense edge plies for repeated nailing. Film weight, thickness and edge treatment are tailored to your pours.

$ Request Quote

Yufu · Formwork Plywood

Formwork Plywood

Film-faced panel built around one number: clean pours per sheet. Face film, edge protection and fixing-zone strength are treated as three separate wear points. Film weight, thickness and edge treatment can be tailored.

Request a Quote →
Core Hardwood veneer
Film Brown or black phenolic, smooth both sides
Adhesive Phenolic
Reuse Guide Varies by site
Options Core, film weight, thickness and edge treatment adjustable

What Sets It Apart

01

Film Weight Matched to Finish

Lighter film for covered or rendered concrete; heavier for exposed concrete.

02

Film Bonded for Clean Stripping

Hot-pressed film stays flat, does not blister or lift.

03

Uniform Gauge

Sanded to even thickness for level joints and less shimming.

04

Strong Fixing Zones

Dense plies near edges hold nails and screws through repeated use.

Jobs That Put the Panel to Work

Exposed Architectural Walls: Heavier film and tight joints decide the finish.
Curved Columns and Bends: Thin 12 mm sheets flex around curved frames.
Precast Moulds and Beds: Repeated casting where film life sets cost per piece.
Hoarding and Temporary Decks: Smooth film sheds mud and water, wipes clean.
Reuse count varies by site.

Planning Your Forms

Tell Yufu

  • Finish class
  • Expected number of pours
  • How the forms will be fixed

We recommend

  • Film weight
  • Thickness
  • Edge treatment

Why Choose Yufu?

Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.

  • Experience: Years of plywood production.
  • Capacity: About 50,000 m³ per year.
  • Equipment: Veneer processing, pressing, cutting, surface treatment.
  • Technology: Multiple utility model patents.
  • Bulk Supply: Ready for wholesale and project orders.

Frequently Asked Questions

How should cut edges be resealed?

Clean and dry, then apply two coats of waterproof edge sealer or solvent-based paint. Reseal every new cut and drilled hole.

Can I use it for DIY concrete projects?

Yes, as a smooth mould for benches, planters and stepping stones. Apply release oil before each pour and seal cut edges.

Which release agent works best?

A thin, even coat of release oil or chemical agent compatible with phenolic film. Clean with a soft scraper, not steel.

Can sheets stay outdoors between uses?

Only briefly. Store flat on bearers and covered; sun and standing water shorten film and edge life.

How do I reduce joint lines on exposed concrete?

Align edges tightly, seal joints, fix to evenly spaced frames and vibrate the concrete properly.

Request a quote

Tell us the size, thickness, quantity and destination port. We reply with a mill-direct price, lead time and loading plan.

Get a Quote WhatsApp