Eucalyptus Plywood
Dense, fine-textured hardwood panel from plantation-grown veneers, with a firm dent-resistant surface and a crisp laminated edge. Core, face veneer and thickness can be adjusted.
Request a Quote →| Density | Approx. 620–720 kg/m³ |
| Sheet Size | Customized |
| Thickness Range | Customized |
| Thickness Tolerance | ±0.4 mm |
| Moisture Content | 8–12% |
| Adhesive | Moisture-resistant urea-melamine or phenolic |
| Options | Face, thickness and adhesive adjustable |
What Sets It Apart
Conditioned Veneers
Logs steamed before peeling and veneers sorted to cancel growth stress.
Full Hardwood Build
Faces and core all eucalyptus for uniform hardness and fastener hold.
Crisp, Tight Edge
Dense fine grain gives clean laminated lines for exposed edges.
Glue Spread Tuned to Density
Settings matched to veneer density keep glue lines continuous.
Projects That Suit a Dense Hardwood Panel
Planning Your Forms
Tell Yufu
- How the panel will be used
- Weight your hardware can take
- Whether the edge will be visible
We recommend
- Face
- Thickness
- Adhesive
Why Choose Yufu?
Langfang Dehou Wood Industry Co., Ltd., established in 2016, specializes in construction formwork plywood.
- Experience: Years of plywood production.
- Capacity: About 50,000 m³ per year.
- Equipment: Veneer processing, pressing, cutting, surface treatment.
- Technology: Multiple utility model patents.
- Bulk Supply: Ready for wholesale and project orders.
Frequently Asked Questions
Why is it heavier than poplar?
Dense wood makes a sheet a third to half heavier. Check hinge and slide ratings, pre-drill near edges and plan two-person lifting.
Will the pink color change?
Yes, it mellows and darkens with light. UV-protective clear finish slows it; tone-sorted faces start even.
Does it wear tooling faster?
It can. Carbide blades suit most jobs; diamond tooling for high volume. Keep tools sharp, feed steady.
Good for a hard-wearing desk or shelf?
Yes. Seal faces and edges; use 18 mm or thicker for longer spans.
How can I limit warp in long parts?
Acclimatise sheets about 48 hours, store flat, cut oversize, rest, then trim. Finish both faces equally.